top of page

Load data for .300 AAC Blackout + .308 | 168gr | Nosler Ballistic Tip

Recommended Powder(s):

.300 AAC Blackout + .308 | 168gr | Nosler Ballistic Tip

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.308 | 168gr | Nosler Ballistic Tip
Manufacturer SKU:
30168
Bullet Weight:
168gr | 10.9g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.307" | 33.2mm
Caliber:
.300 AAC Blackout load data
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.448" | 11.4mm
Shank Seated Depth:
0.346" | 8.8mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B4099_C348
Last updated:
2025-01-01
Recommended Twist Rate:
1:11 - 1:10

Load data for 26 loads in caliber .300 AAC Blackout with .308 | 168gr | Nosler Ballistic Tip bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
93%
44686
88%
**36
100%
Accurate 5744
<<locked>>
92%
45542
90%
**11
96%
Accurate No. 11 FS 👍
<<locked>>
91%
43482
86%
**85
99%
Hodgdon LilGun
<<locked>>
88%
44744
88%
**54
100%
IMR 4227
<<locked>>
96%
37550
74%
**06
96%
Lovex D060
<<locked>>
94%
45542
90%
**11
96%
Lovex D063
<<locked>>
89%
42960
85%
**75
95%
Lovex S040
<<locked>>
85%
43627
86%
**19
100%
Lovex S053
<<locked>>
97%
36071
71%
**09
99%
ReloadSwiss RS 36
<<locked>>
95%
34534
68%
**06
95%
Shooters World Blackout
<<locked>>
89%
42960
85%
**75
95%
Shooters World Buffalo Rifle
<<locked>>
94%
45542
90%
**11
96%
Vihtavuori N110
<<locked>>
95%
41582
82%
**49
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
87%
37260
73%
**47
99%
[Accurate 5744]*
<<locked>>
81%
33707
66%
**44
92%
Accurate No. 11 FS
<<locked>>
83%
34026
67%
**63
97%
Hodgdon LilGun
<<locked>>
81%
34708
68%
**39
100%
[IMR 4227]*
<<locked>>
92%
33402
66%
**47
94%
[Lovex D060]*
<<locked>>
83%
33707
66%
**44
92%
[Lovex D063]*
<<locked>>
81%
33692
66%
**44
92%
Lovex S040
<<locked>>
81%
38493
76%
**60
100%
Lovex S053
<<locked>>
92%
31879
63%
**47
98%
[ReloadSwiss RS 36]*
<<locked>>
91%
30980
61%
**47
93%
[Shooters World Blackout]*
<<locked>>
81%
33692
66%
**44
92%
[Shooters World Buffalo Rifle]*
<<locked>>
83%
33707
66%
**44
92%
Vihtavuori N110
<<locked>>
88%
33997
67%
**57
100%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page